EE472 Syllabus,
Fall 2011
|
Dates |
Subject |
Reading |
Problems (due the following Wednesday) |
Lab Group 1 | Lab Group 2 | Lab Group 3 |
|
8/22-8/28 |
Optics Fundamentals, Dispersion |
1.1-1.6, 3.1-3.3 |
HW1: Ch 1 (9,14,23,27,29,31); Ch 3 (5,6,14,25) | Hardware Lab 1 | Hardware Lab 1 | Hardware Lab 1 |
|
8/29-9/4 |
Rays, Plane Boundaries |
2.1,2.4-2.6, |
HW2: Ch 2 (10,12,13); Ch 3 (1,3,7,18,20,22) | Simulation Lab 1 | Hardware Lab 2 | Hardware Lab 2 |
|
9/5-9/11 |
Critical Angle, |
3.6-3.7, |
HW3: Ch 2 (2); Ch 3 (10,13); Ch 4 (8,11 ) |
Tuesday follows Monday schedule (no lab) | ||
|
9/12-9/18 |
Slab Waveguides, Optical Fiber |
4.5-4.7, |
HW4: Ch 4 (1,2,3,4,5(no plots),6) |
Hardware Lab 2 | Simulation Lab 1 | Hardware Lab 3 |
|
9/19-9/25 |
Attenuation, Optical Fiber Modes |
5.3-5.4 |
HW5: Ch 4 (9); Ch 5 (3,9,10,16,23(no plot),25,30,32,33) |
Hardware Lab 3 | Hardware Lab 3 | Simulation Lab 1 |
|
9/26-10/2 |
Fiber Dispersion, |
5.6-5.9, |
HW6: Ch 4 (22); Ch 6 (1,2,4,5(bc),7(plot vs f),8,21,22) |
Simulation Lab 2 | Hardware Lab 4 | Hardware Lab 4 |
|
10/3-10/9 |
LEDs, Resonant
Cavities, |
3.4, 6.3-6.6 |
HW7a: Ch 6 (6,9,12,18,19,23,24) (due Friday, 10/14) | Hardware Lab 4 | Simulation Lab 2 | Hardware Lab 5 |
|
10/10-10/16 |
Single Mode Laser Diodes, Direct Modulation |
6.9-6.10, |
HW7b: Ch 10 (2,3,4,5) |
Hardware Lab 5 | Hardware Lab 5 | Simulation Lab 2 |
|
10/17-10/23 |
External Modulation, Modulation Formats |
4.6, 10.3-10.5 |
HW8: Ch 4 (18,19 - just plot pout and vin vs t for both, don't normalize); Ch 10 (7,12,15,19,21,22) | EXAM I, 18 Oct 11 (2010 Exam I Solution) | ||
|
10/24-10/30 |
||||||
| Photodetection, Noise | 7.1-7.6, 11.1 |
HW9: Ch 7 (2,6,8,11,12,14,15,18,19,22); Ch 11 (1) |
Simulation Lab 3 | Hardware Lab 7 | Hardware Lab 6 | |
|
10/31-11/6 |
SNR, BER | 11.2-11.3 |
HW10: Ch 7 (21); Ch 11 (2,3,4,5,6,8,10,11,14,18a-d) |
Hardware Lab 6 | Simulation Lab 3 | Hardware Lab 7 |
|
11/7-11/13 11/11 - Veterans Day |
Receivers, Network Components |
11.5-11.6, |
HW11: Ch 9 (2,4,6,7,9,15,17,18,19,22) (due 11/21) |
Hardware Lab 7 | Hardware Lab 6 | Simulation Lab 3 |
|
11/14-11/20 |
Network Components, WDM |
9.4-9.11 |
HW12: Ch 9 (23,30,31,32,35,36,37 - use phase shift of 8p radians, find DL to 4 decimal places) (due 11/30) |
Simulation Lab 4 | Hardware Lab 8 | Hardware Lab 8 |
|
11/21-11/27 |
WDM, Amplifiers |
6.7-6.8,11.4 |
HW13: Ch 6 (13,14,15,26,29,31); Ch 11 (27abc,28) (due 12/5) |
Hardware Lab 8 | Simulation Lab 4 | Hardware Lab 9 |
|
11/28-12/4 |
Amplifiers, System Design |
12.1-12.3 | HW14: none | Hardware Lab 9 | Hardware Lab 9 | Simulation Lab 4 |
|
12/5-12/11 |
Design Project |
EXAM II, 6 Dec 11 (2010 Exam II Solution) | ||||
| Hardware Labs (in Ri 022) | 1 | Lab Intro, Handling Fiber |
| 2 | Numerical Aperture | |
| 3 | Fiber Coupling and Attenuation | |
| 4 | Single Mode Fibers II | |
| 5 | Optical Modulator Characterization | |
| 6 | SNR | |
| 7 | BER | |
| 8 | Passive Device Characterization | |
| 9 | Optical Amplifiers | |
|
Simulation Labs (in Ri 061) |
1 | Introduction |
| 2 | Pulse Degradation in Optical Fiber | |
| 3 | Optical Modulation - External vs Direct | |
| 4 | Digital Receiver Sensitivity in a Fiber Optic Link | |