| Journal Publications |
K.A. Flack , M.P. Schultz, & W.B. Rose (2012), “The Onset of Roughness Effects in the Transitionally Rough Regime,” revision in preparation for International Journal of Heat and Fluid Flow.
J. Hong, J. Katz, C. Meneveau, & M.P. Schultz (2012), “Coherent Structures and Associated Subgrid-Scale Energy Transfer in a Rough-Wall Turbulent Channel Flow,” submitted to Journal of Fluid Mechanics.
J. Hong, J. Katz, & M.P. Schultz (2011), “Near-Wall Turbulence Statistics and Flow Structures over Three-Dimensional Roughness in a Turbulent Channel Flow,” Journal of Fluid Mechanics, Vol. 667, pp. 1-37. [download pdf]
M.P. Schultz, J.A. Bendick, E.R. Holm, & W.M. Hertel (2011), “Economic Impact of Biofouling on a Naval Surface Ship,” Biofouling, Vol. 27, 87-98.[download pdf]
R.J. Volino, M.P. Schultz, & K.A. Flack (2011), “Turbulence Structure in a Boundary Layer over Periodic Two-Dimensional and Three-Dimensional Roughness,” Journal of Fluid Mechanics, Vol. 676, pp. 172-190.[download pdf]
K.A. Flack & M.P. Schultz (2010), “Review of Hydraulic Roughness Scales in the Fully Rough Regime,” ASME Journal of Fluids Engineering , Vol. 132, Art. No. 041203, 10 pp. [download pdf]
M.P. Schultz & K.A. Flack (2009), “Turbulent Boundary Layers over a Systematically-Varied Rough Wall,” Physics of Fluids, Vol. 21, Art. No. 015104, 9 pp. [download pdf]
R.J. Volino, M.P. Schultz, & K.A. Flack (2009), “Turbulence Structure in a Boundary Layer with Two-Dimensional Roughness,” Journal of Fluid Mechanics, Vol. 635, pp. 75-101.[download pdf]
S.C.C. Bailey, M.N. Hultmark, A.J. Smits, & M.P. Schultz (2008), “Azimuthal Structure of Turbulence in High Reynolds Number Pipe Flow,” Journal of Fluid Mechanics, Vol. 615, pp. 121-138.[download pdf]
K.M. Womack, R.J. Volino, & M.P. Schultz (2008), “Measurements in Film Cooling Flows with Periodic Wakes,” Journal of Turbomachinery, Vol. 130, Art. No. 041008, 13 pp.[download pdf]
K.M. Womack, R.J. Volino, & M.P. Schultz (2008), “Combined Effects of Wakes and Jet Pulsing on Film Cooling,” Journal of Turbomachinery, Vol. 130, Art. No. 041010, 12 pp.[download pdf]
M.P. Schultz & K.A. Flack (2007), “The Rough-Wall Turbulent Boundary Layer from the Hydraulically Smooth to the Fully Rough Regime,” Journal of Fluid Mechanics, Vol. 580, pp. 381-405.[download pdf]
M.P. Schultz (2007), “Effects of Coating Roughness and Biofouling on Ship Resistance and Powering,” Biofouling, Vol. 23, pp. 331-341.[download pdf]
|
| |
K.A. Flack, M.P. Schultz, & J.S. Connelly (2007), “Examination of a Critical Roughness Height for Wall Similarity,” Physics of Fluids, Vol. 19, Art. No. 095104, 9 pp.[download pdf]
R.J. Volino, M.P. Schultz, & K.A. Flack (2007), “The Turbulence Structure in Rough- and Smooth-Wall Boundary Layers,” Journal of Fluid Mechanics, Vol. 592, pp. 263-293.[download pdf]
J.S. Connelly, M.P. Schultz, & K.A. Flack (2006), “Velocity-Defect Scaling for Turbulent Boundary Layers with a Range of Relative Roughness,” Experiments in Fluids, Vol. 40, pp. 188-195.[download pdf]
K.A. Flack, M.P. Schultz, & T.A. Shapiro (2005), “Experimental Support for Townsend’s Reynolds Number Similarity Hypothesis for Rough Walls,” Physics of Fluids, Vol. 17, Art. No. 035102, 9 pp.[download pdf]
M.P. Schultz & K.A. Flack (2005), “Outer Layer Similarity in Fully Rough Turbulent Boundary Layers,” Experiments in Fluids, Vol. 38, pp. 328-340.[download pdf]
M.P. Schultz (2004), “Frictional Resistance of Antifouling Coating Systems,” ASME Journal of Fluids Engineering, Vol. 126, pp. 1039-1047.[download pdf]
D.S. Miklosovic, M.P. Schultz, & C. Esquivel (2004), “Effects of Surface Finish on the Aerodynamic Performance of a Representative Stabilizer,” AIAA Journal of Aircraft, Vol. 41, pp. 1073-1081.[download pdf]
E.R. Holm, M.P. Schultz, E.G. Haslbeck, W.J. Talbot, & A.J. Field (2004), “Evaluation of Hydrodynamic Drag on Experimental Fouling-Release Surfaces, using Rotating Disks,” Biofouling, Vol. 20, No. 4/5, pp. 219-226.[download pdf]
M.P. Schultz & K.A. Flack (2003), “Turbulent Boundary Layers over Surfaces Smoothed by Sanding,” ASME Journal of Fluids Engineering, Vol. 125, pp. 863-870.[download pdf]
M.P. Schultz & A. Myers (2003), “Comparison of Three Roughness Function Determination Methods,” Experiments in Fluids, Vol. 35, pp. 372-379.[download pdf]
M.P. Schultz & R.J. Volino (2003), “Effects of Concave Curvature on Boundary Layer Transition under High Free-Stream Turbulence Conditions,” ASME Journal of Fluids Engineering, Vol. 125, pp. 18-27.[download pdf]
R.J. Volino, M.P. Schultz, & C.M. Pratt (2003), “Conditional Sampling in a Transitional Boundary Layer under High Free-Stream Turbulence Conditions,” ASME Journal of Fluids Engineering, Vol. 125, pp. 28-37.[download pdf]
M.P. Schultz, J.A. Finlay, M.E. Callow, & J.A. Callow (2003),“Three Models to Relate the Detachment of Low Form Fouling at Laboratory and Ship Scale,” Biofouling, Vol. 19, No. Supplement, pp. 17-26.[download pdf]
J. Stein, K. Truby, C. Darkangelo-Wood, M. Takemori, M. Vallance, G. Swain, C. Kavanagh, B. Kovach, M. Schultz, D. Wiebe, E. Holm, J. Montemarano, D. Wendt, C. Smith & A. Meyer (2003),“Structure-Property Relationships of Silicone Biofouling-Release Coatings: Effects of Silicone Network Architecture on Pseudobarnacle Attachment Strengths,” Biofouling, Vol.19, No. 2, pp. 87-94.[download pdf]
Judith Stein, K. Truby, C. Darkangelo-Wood, Jeff Stein, M. Gardner, G. Swain, C. Kavanagh, B. Kovach, M. Schultz, D. Wiebe, E. Holm, J. Montemarano, D. Wendt, C. Smith & A. Meyer (2003),“Silicone Foul Release Coatings: Effect of the Interaction of Oil and Coating Functionalities on the Magnitude of Macrofouing Attachment,” Biofouling, Vol. 19, No. Supplement, pp. 71-82.[download pdf]
J.A. Finlay, M.E. Callow, M.P. Schultz, G.W. Swain & J.A. Callow (2002), “Adhesion Strength of Settled Spores of the Green Alga Enteromorpha,” Biofouling, Vol.18, No.4, pp. 251-256.[download pdf]
M.P. Schultz (2002), “The Relationship between Frictional Resistance and Roughness for Surfaces Smoothed by Sanding,” ASME Journal of Fluids Engineering, Vol. 124, No. 2, pp. 492-499.[download pdf]
M.P. Schultz & K.A. Flack (2002), “Effect of Strake Geometry and Centerbody on the Lift of Swept Wings,” AIAA Journal of Aircraft, Vol. 39, No. 2, pp. 377-379.[download pdf]
J.R. Saylor, K.A. Flack, M.P. Schultz, & G.B. Smith (2002), “The Correlation between Surface Temperature and Subsurface Velocity during Evaporative Convection,” Experiments in Fluids, Vol. 32, pp. 570-579.[download pdf]
S.N. Gangadharan, M. Schultz, B. Collino, A. Clark, & C.R. Wimberly (2001), “Experimental Investigation of Enteromorpha clathrata Biofouling on Lifting Surfaces of Marine Vehicles,” SNAME Marine Technology Journal, Vol. 38, pp. 31-50.
C.J. Kavanagh, M.P. Schultz, G.W. Swain, J. Stein, K. Truby, & C.D. Wood (2001), “Variation in Adhesion Strength of Balanus eburneus, Crassostrea virginica and Hydroides dianthus to Fouling-Release Coatings,” Biofouling, Vol. 17, pp. 155-167.[download pdf]
G. Swain, A. Anil, R. Baier, L. Bosoolai, E. Conte, A. Cook, M. Hadfield, E. Haslbeck, E. Holm, C. Kavanagh, D. Kohrs, C. Lee, L. Mazzella, A. Meyer, P. Qian, S. Sawant, M. Schultz, J. Sigurdsson, C. Smith, A. Terlizzi, A. Wagh, R. Zimmerman, & V. Zupo (2000), “The Performance of Silicone Based Fouling-Release Coatings Exposed at Seven Static Immersion Sites Worldwide,” Biofouling, Vol 16, pp. 331-344.[download pdf]
M.P. Schultz (2000), “Turbulent Boundary Layers on Surfaces Covered with Filamentous Algae,” ASME Journal of Fluids Engineering, Vol. 122, pp. 357-363.[download pdf]
M.P. Schultz, J.A. Finlay, M.E. Callow, & J.A. Callow (2000), “Turbulent Channel Flow Apparatus for the Determination of the Adhesion Strength of Microfouling Organisms,” Biofouling, Vol. 15, pp. 243-251.[download pdf]
M.P. Schultz & G.W. Swain (2000), “The Influence of Biofilms on Skin Friction Drag,” Biofouling, Vol. 15, pp. 129-139.[download pdf]
M.P. Schultz & G.W. Swain (1999), “The Effect of Biofilms on Turbulent Boundary Layers,” ASME Journal of Fluids Engineering, Vol. 121, pp. 44-51.[download pdf]
M.P. Schultz, C.J. Kavanagh, & G.W. Swain (1999), “Hydrodynamic Forces on Barnacles: Implications on Detachment from Fouling-Release Surfaces,” Biofouling, Vol. 13, pp. 323-335.[download pdf]
A.E. Mera, R.B. Fox, S. Bullock, G.W. Swain, M.P. Schultz, P. Gatenholm, & K.J. Wynne (1997), “Toward Minimally Adhesive Surfaces Utilizing Siloxanes,” Naval Research Reviews, Vol. XLIX, pp. 4-8.
G.W. Swain & M.P. Schultz (1996), “The Testing and Evaluation of Non-Toxic Antifouling Coatings,” Biofouling, Vol. 10 (1-3), pp. 187-197.[download pdf]
|
