Faculty

Carolyn Q. Judge, Ph.D.

Professor (NAOE), Director of Hydromechanics Laboratory & Deputy Director of Teaching, Learning, and Multimedia (Center for Teaching and Learning) 

•  Phone: 410-293-2502
•  Fax: 410-293-2219
•  E-mail: judge@usna.edu
•  338 Rickover Hall, 213 Mahan Hall

Education

• Ph.D., Naval Architecture & Marine Engineering, University of Michigan, 2000
• M.S.E., Naval Architecture & Marine Engineering, University of Michigan, 1997
• B.S., Mechanical & Aerospace Engineering, Cornell University, 1996

Professional Experience

• Dept. of Naval Architecture and Ocean Engineering, US Naval Academy
  • Associate Professor, 2015 - present
  • Assistant Professor, 2005 – 2015
  • Adjunct Assistant Professor, 2003 – 2005
  • Visiting Research Professor, 2002
• Dept. of Mechanical Engineering, US Naval Academy
  • Visiting Assistant Professor, 2008 – 2010
  • Adjunct Assistant Professor, 2006 – 2008
• Dept. of Mechanical Engineering, University of Michigan
  • Postdoctoral Research Fellow, 2000 – 2002
  • Adjunct Lecturer, 2001
• Graduate Engineering Intern, Naval Surface Warfare Center, Coast Systems Station, Panama City, FL, Summer 1997
• Undergraduate Co-op Student, Boeing: Space and Defense, Seattle, WA, Fall 1994 and Summer 1995

Professional Memberships & Registration

• Society of Women Engineers (SWE)
• Society of Naval Architects and Marine Engineers(SNAME)

Awards

• Office of Naval Research, Young Investigator Program award, 2012 - 2015
• Link Foundation Fellowship for Doctoral Research in Ocean Engineering and Instrumentation, 1999-2000
• Department of Defense/National Defense Science and Engineering Graduate Fellowship, 1996-1999
• John McMullen Dean Scholar, College of Engineering, Cornell University, 1992-1996

Professional & Community Service

• Faculty Senate
• Library Subcommittee, 2010 - 2015
• Divisional Representative, 2011-2013
• Divisional Trident Committee, 2012 – 2013

• STEM Outreach, Expanding Your Horizons, 2011
• Volunteer, SeaPerch, Severna Park Elementary School, 2010 – 2015

Research & Publications

• A. Mohtat, R. Challa, S.C. Yim, and C.Q. Judge, 2015, “Numerical Modeling of Hydrodynamic Impact and Local Slamming Effects,”  Proceedings of the 13^th International Conference on Fast Sea Transportation, Washington, D.C., September 2015.
• C.Q. Judge, J.A. Judge, and C.M. Ikeda, 2015, “Impact Pressures on the Bottom of a Prismatic Planing Hull During Water Impact,” Proceedings of the 13^th International Conference on Fast Sea Transportation, Washington, D.C., September 2015.
• C.A. Diamond, C.Q. Judge, B. Orazov, O. Savas, and O.M. O’Reilly, 2015, “Mass-modulation schemes for a class of wave-energy converters: Experiments, models, and efficacy,” Ocean Engineering, Vol. 104, pp. 452-468.
• C.Q. Judge and C.M. Ikeda, 2014, “An Experimental Study of Planing Hull Wave Slam Events,” Proceedings of the 30^th Symposium on Naval Hydrodynamics, Hobart, Tasmania, Australia, November 2014.
• T.C. Fu, A.M. Mousaviraad, Z. Wang, F. Stern, K.A. Brucker, T.T. Shea, D.C. Wyatt, D. Dommermuth, C.Q. Judge, and C.M. Ikeda, 2014, “A Computational Fluid Dynamics Study of the Hydrodynamics of a High Speed Deep-V Planing Craft in Calm Water and Waves,” Proceedings  of the 30^th Symposium on Naval Hydrodynamics, Hobart, Tasmania, Australia, November 2014.
• C.Q. Judge, 2014, “Empirical Methods for Predicting Lift and Heel Moment for a Heeled Planing Hull,” Journal of Ship Production and Design, Vol. 30, No. 4, pp. 175-183.
• C.Q. Judge, 2014, “Coupling of Heave and Roll for High-Speed Planing Hulls,” Proceedings of the ASME 2014 33^rd International Conference on Ocean, Offshore and Arctic Engineering, San Francisco, CA, June 2014.
• C.M. Ikeda and C.Q. Judge, 2014, “Slamming Impacts of Hydrodynamically-Supported Craft,” Proceedings of the ASME 2014 33^rd International Conference on Ocean, Offshore and Arctic Engineering, San Francisco, CA, June 2014.
• T.C. Fu, T.T. O’Shea, K.A. Brucker, C.Q. Judge, C.M. Ikeda, D.C. Wyatt, and D.G. Dommermuth, 2014, “Numerical Simulation of Short Duration Hydrodynamic Impact,” Proceedings of the ASME 2014 33^rd International Conference on Ocean, Offshore and Arctic Engineering, San Francisco, CA, June 2014.
• T.C. Fu, T.T. O’Shea, C.Q. Judge, D. Dommermuth, K. Brucker, and D. C. Wyatt, 2013, “A Detailed Assessment of Numerical Flow Analysis (NFA) to Predict the Hydrodynamics of a Deep-V Planing Hull,” International Shipbuilding Progress, Vol. 60, No. 1-4, pp. 43-69.
  • Selected as a Best Paper from the Proceedings of the 29^th Symposium on Naval Hydrodynamics, Gothenburg, Sweden, August 2012.
• C.Q. Judge and J.A. Judge, 2013, “Measurement of Hydrodynamic Coefficients on a Planing Hull using Forced Roll Oscillations,” Journal of Ship Research, Vol. 57, No. 2, pp. 112-124.
• C.Q. Judge and W. Beaver, 2013, “Development of a Forced Roll Mechanism for Planing Hull Models,” Naval Engineers Journal, Vol. 125, No. 2, pp. 69-75.
• C.Q. Judge, 2013, “Comparisons Between Prediction and Experiment for Lift Force and Heel Moment for a Planing Hull,” Journal of Ship Production and Design, Vol. 29, No. 1, pp. 36-46.
  • Selected by the SNAME Featured Papers Committee as a Significant Paper of 2013 and reproduced in the 2013 volume of the SNAME Transactions.
• C.Q. Judge, 2012, “Dynamic Transverse Stability for High Speed Craft,” Proceedings of the 11^th International Conference on the Stability of Ships and Ocean Vehicles, Athens, Greece, September 2012.
• C.Q. Judge, 2012, “Static and Dynamic Forces and Wetted Lengths for a Planing Hull Model Forced in Roll,” Proceedings of the 3^rd Chesapeake Power Boat Symposium, Annapolis, MD, June 2012.
• C.Q. Judge, A. Troesch, and M. Perlin, 2004, “Initial water impact of a wedge at vertical and oblique angles,” Journal of Engineering Mathematics, Vol. 48, pp. 279-303.